Product Data

Dew Point Corrosion Barriers
  • COMBAT Defiance

    COMBAT Defiance is an two-component mixture of tough asphalt and polymers designed to form a protective barrier to protect steel from chemical attack and abrasion from flying particulate in applications such as dust collectors and fan housings.
    COMBAT Defiance cures in situ, therefore exhibiting nominal shrinkage forming an elastomeric coating resistant to cracking from expansion and vibration from industrial equipment

    View PDF View SDS A View SDS B
  • COMBAT Tango Down

    COMBAT Tango Down is a primer that can be applied to clean steel surfaces that have been "preped" for application of  HT Mastic 500, HT Mastic 500NF or CorrFX 600. Why bother? Two reasons: 1. Bad Weather, Schedueling, material shortages -
    COMBAT Tango Down can be quickly sprayed over "preped" steel surfaces in a thin 2-4 mil layer with a garden sprayer in the event of unforeseen problems that might prevent application of the final 125 mil mastic coating. 2. Use of
    COMBAT Tango Down allows for surface preparation and priming of steel surfaces at one location and final application of 125 mil mastic coating at another WITHOUT repeating any sandblasting. You can prep the steel half way around the world and then apply the final coating on site without additional expense for up to ONE YEAR!

    View PDF View SDS
  • COMBAT Flacjak

    For extreme corrosion protection,

    COMBAT FlacJak replaces banned carcinogenic Coal Tar Epoxy's.
    COMBAT FlacJak is a No VOC two component epoxy that far outperforms its predecessor. There is no shrinkage loss and
    COMBAT FlacJak can be applied in 1/3 the thickness specified for asphaltic Mastics such as HT Mastic 500. This hard coating is impact resistant and will withstand sulfuric acid concentrations up to 75%.

    View PDF View SDS
  • KilnCoat 2100

    Non-hazardous water based ceramic high temperature coating that reduces oxidation inhibitor to metal surfaces. Temperature use limit is 2100° F. Contains no organic solvents or binders that dissipate at operational temperatures. In addition, KilnCoat 2100 serves as an insulation coating as well as corrosion resistance.

    View PDF View SDS View Application
  • HT Mastic 500

    Dew Point Corrosion protection behind refractory linings. Apply to furnace casing after weldment of anchors. Provides protection from chemical attack from alkali and acidic aqueous dew-point condensation. Maximum use limit 400° F with intermittents up to 500° F. Solvent based asphalt product.

    View PDF View SDS View SDS (t)
  • HT Mastic 500NF

    Dew Point Corrosion coating used behind refractory linings. Apply to furnace casing after weldment of anchors. Provides protection from chemical attack from alkali and acidic aqueous dew-point condensation. Maximum use limit 400° F with intermittents up to 500° F. Water based asphalt formulation for easy transportation and clean-up.

    View PDF View SDS View SDS (t)
  • CorrFX 600

    Durable Dew Point corrosion protection that can be exposed to working surfaces up to 500° F. Formulation contains refractory materials which provide a durable hard surface. Asphalt coating. Has excellent resistance to salts, alkali and acid and mechanical abuse. Water based asphalt formulation for easy transportation and clean-up.

    View PDF View SDS


Metal & Concrete Reconstruction
  • COMBAT NuMetal

    COMBAT NuMetal is a versatile epoxy metal repair compound that is machinable yet has the strength needed to hold up to aggressive industrial applications.  
    COMBAT NuMetal is 100% solids, no VOC’s epoxy mixture that has the ability to get your equipment back on line fast.  
    COMBAT NuMetal can stop high pressure leaks in corrosive environments, eliminating the need for costly down time.  Surface preparation is minimal.  
    COMBAT NuMetal can be sanded, drilled into, or cut allowing for reattachment of equipment and fitting.   Patch it and walk away from your problem.

    View PDF View SDS A View SDS B
  • COMBAT Diamond

    COMBAT Diamond is an extremely durable abrasion resistant compound that sets-up harder than metal.  
    COMBAT Diamond contains an aggressive mixture of silicon carbide, alumina, and ceramic beads blended into a workable mixture ideally suited to industrial applications where abrasion has blown through elbows, cyclones, and material handling equipment.  
    COMBAT Diamond is 100% solids, no VOC’s epoxy mixture that has the ability to get your equipment up and running in no time by eliminating the need for time consuming metal cutting and welding repairs on existing production equipment.  Surface preparation is simple.  
    COMBAT Diamond is extremely hard and abrasive resistant.  
    COMBAT Diamond is non-machinable due to the inherent hardness of the set material.  Patch it and walk away from your problems,

    View PDF View SDS A View SDS B
  • COMBAT Prime

    COMBAT “PRIME” is specially formulated as an all-purpose concrete sealant, corrosion protection, and primer all wrapped up in one.  
    COMBAT “PRIME” can be used alone or as a concrete preperation for more exotic higher duty coatings to follow.  
    COMBAT “PRIME” exhibits excelent penetration into existing masonry surfaces providing for a great sealant by itself, but also acts as a medium to adhere other higher service corrosopn resistant products to.  
    COMBAT “PRIME” is 100% solids, low viscosity hybrid polymer that can be applied to existing and green concrete surfaces.  Surface prperation is minimal.  
    COMBAT “PRIME” demonstrates a relatively slow cure time making it an ideal choice of products to apply to hot concrete surfaces.  
    COMBAT “PRIME” can be brushed, rolled, or sprayed onto concrete surfaces.

    View PDF View SDS A View SDS B
  • COMBAT LiteCrete

    COMBAT LiteCrete is a very light weight yet rock hard concrete repair system ideally suited to reinforce or fill decayed masonry materials.  
    COMBAT LiteCrete is 100% solids, no VOC’s two component mixture that contains hollow silica sphere resulting in a trowelable material lighter than water.  
    COMBAT LiteCrete is more resistant to corrosion than concrete.  It penetrates and bonds to existing concretes to the point where the concrete will break before the
    COMBAT LiteCrete.  This versatile repair medium is ideally suited for overhead applications as
    COMBAT LiteCrete will not slump after installed.  When weight is a consideration,
    COMBAT LiteCrete is the only option!

    View PDF View SDS A View SDS B View SDS C
  • COMBAT Greez-IT

    COMBAT Greez-IT is a multi-task High Temperature Lubricant with outstanding performance in countless thermal applications.
    COMBAT Greez-It can be applied to equipment the same as traditional lubricants. At high temperature, the petroleum carrier evacuates leaving a specially formulated coating that bonds to the base metal. Forming a smooth low friction contact point by filling the imperfections and irregularities on metal surfaces that cause excessive wear on critical components–up to 2100° F.

    View PDF View SDS


Oxidation / Alkali Protection
  • COMBAT 86

    COMBAT “86” is a high grade, two part, 100% epoxy broad spectrum corrosion resistant coating designed specifically to be used in exterior applications with minimal surface preparation.  
    COMBAT “86” is UV resistant, withstands temperatures to 250F and will stick to any metal surface unprimed or badly scaled and corroded.  
    COMBAT “86” is as the type of product all maintenance departments need to keep on hand to dress up the appearance of discolored, stained, or corroded machinery.  The grey/silver coloration allows it to blend into most industrial applications providing a cover-up of old problems.  
    COMBAT “86” can be brushed, sprayed, or rolled onto surfaces in small or large batches.  
    COMBAT “86” is by far the most versatile “catch all” product available from Matrix Solutions.  
    COMBAT “86” will clean up the appearance of any piece of equipment and keep it out of sight and out of mind.  86 it now!

    View PDF View SDS A View SDS B
  • COMBAT 250

    COMBAT 250 is the economical solution to most industrial corrosion problems on metal surfaces.  
    COMBAT 250 is a rugged two component epoxy coating that withstands aggressive chemical attack in applications up to 250F.  
    COMBAT 250 is available in a variety of colors including blue grey, light grey, and red.  
    COMBAT 250 is self-priming and provides exceptional wear characteristics and will flex with normal vibration and expansion.  
    COMBAT 250 is ideally suited for applications that require coating to come in contact with chemical solution such as holding tanks, cooling towers, and slurry transport.

    COMBAT 250 is non-hazardous, non-corrosive, and emits no foul vapor during installation.  
    COMBAT 250 can be applied by roller, brush, or spray and sets with 100% solids meaning there is no volume shrinkage after applied.  
    COMBAT 250 is the workhouse of industrial coatings that will solve most of your metal protection needs.

    View PDF View SDS A View SDS B
  • COMBAT 350

    COMBAT 350 is a two component high temerature epoxy coating designed to withstand aggressive chemical attack in application up to 350F.  Blended out of 100% Solids/No VOC’s,
    COMBAT 350 is ideally suited for moderate temperature applications where corrosive affluent is a problem.  
    COMBAT 350 is self-priming and exhibits excellent wear characteristics  and performs well on stack interiors or exteriors, bag houses, ducts, valves, and anything subject to temperature corrosion.  
    COMBAT 350 is non-hazardous, non-corrosive and emits no foul vapor during installation.  
    COMBAT 350 exhibits excellent heat distortion properties ad has the ability to flew with normal vibration and expansion.  
    COMBAT 350 can be applied with brush, roller, or spray equipment.

    View PDF View SDS A View SDS B
  • COMBAT 450

    COMBAT 450 offers excellent protection against dew point corrosion and other enviromental enemies.  
    COMBAT 450 is a ruged coating that withstands temperatures up to 450F.  
    COMBAT 450 is available in spray grade in both light and dark grey making it the perfect industrial caoting for internal or expternal equipment or structures that may be suffering from chemical discoloration.  
    COMBAT 450 performs well on stack interiors or exteriors, bag houses, ducts, valves, and anything subject to temperaure and corrosion.  
    COMBAT 450 is self-priming and provides exceptional wear protection to both metal and concrete surfaces.

    COMBAT 450 is non-hazardous, non-corrosive, and emits no foul vapor during installation.  
    COMBAT 450 exhibits excellent heat distortion properties and has the ability to flex with normal vibration and expansion.

    View PDF View SDS A View SDS B
  • COMBAT Greez-IT

    COMBAT Greez-IT is a multi-task High Temperature Lubricant with outstanding performance in countless thermal applications.
    COMBAT Greez-It can be applied to equipment the same as traditional lubricants. At high temperature, the petroleum carrier evacuates leaving a specially formulated coating that bonds to the base metal. Forming a smooth low friction contact point by filling the imperfections and irregularities on metal surfaces that cause excessive wear on critical components––up to 2100° F.

    View PDF View SDS


Abrasion Protection
  • COMBAT Defiance

    COMBAT Defiance is an two-component mixture of tough asphalt and polymers designed to form a protective barrier to protect steel from chemical attack and abrasion from flying particulate in applications such as dust collectors and fan housings.
    COMBAT Defiance cures in situ, therefore exhibiting nominal shrinkage forming an elastomeric coating resistant to cracking from expansion and vibration from industrial equipment

    View PDF View SDS A View SDS B
  • COMBAT 250D

    COMBAT 250-D is a modified version of
    COMBAT 250, the workhorse of the
    COMBAT line of industrial coatings.  
    COMBAT 250-D is specifically formulated with the addition of alumina to enhance abrasion characteristics for tough applications where coatings come in contact with abrasive slurry and dust.  
    COMBAT 250-D withstands abrasion with less than 24 mg loss on ASTM-D-4060 at temperatures up to 250F.  
    COMBAT 250-D cures with a dark grey color.  
    COMBAT 250 is self-priming and will flex with normal vibration and expansion.

    COMBAT 250 is non-hazardous, non-corrosive and emits no foul vapor during installation.  
    COMBAT 250 can be applied by roller, brush, or spray and sets with 100% solids meaning there is no volume shrinkage after applied.

    View PDF View SDS A View SDS B
  • COMBAT MS-150

    COMBAT MS-150 100% Solids Industrial Tile and Structural Adhesive

    COMBAT MS-150 adhesive is a high-strength structural adhesive, supplied as two distinctive colored thixotropic pastes, which the user can easily monitor while blending them into the third final color.  Its viscous, thixotropic qualities keep
    COMBAT MS-150 in place during application.  Although developed primarily for bonding ceramic tile to itself or to metal, it readily bonds to most other solid substrates and shows superior adhesion at temperatures exceeding 450F.  It is especially useful for bonding dissimilar material, where differential expansion and contraction during temperature vibrations or vibrations would cause release of other adhesives.

    View PDF View SDS A View SDS B
  • COMBAT Greez-IT

    COMBAT Greez-IT is a multi-task High Temperature Lubricant with outstanding performance in countless thermal applications.
    COMBAT Greez-It can be applied to equipment the same as traditional lubricants. At high temperature, the petroleum carrier evacuates leaving a specially formulated coating that bonds to the base metal. Forming a smooth low friction contact point by filling the imperfections and irregularities on metal surfaces that cause excessive wear on critical components––up to 2100° F.

    View PDF View SDS
  • CorrFX 600

    Durable Dew Point corrosion protection that can be exposed to working surfaces up to 500° F. Formulation contains refractory materials which provide a durable hard surface. Asphalt coating. Has excellent resistance to salts, alkali and acid and mechanical abuse. Water based asphalt formulation for easy transportation and clean-up.

    View PDF View SDS